Davco Powder Mastic Dustless Tile Adhesive 20kg

A flexible, cement-based tile adhesive ideal for large format and rectified edge tiles.

• Commercial grade
• Dust Less Technology
• Non-vertical slump for easy wall tiling

Usage

Surfaces

Most common substrates; building boards including compressed and fibre cement sheet, fully cured concrete, screed (cured for 7 days), rendered brickwork and blockwork, Davco waterproofing membranes and acoustic underlays.

Tiles

Ideal for large format and rectified (square) edge tiles, porcelain, ceramic, mosaic and marble tiles.

Areas

Suitable for interior and exterior applications. Commercial and domestic walls and floors including high foot traffic locations, bathrooms, showers, kitchens, laundries, living rooms, balconies and patios.

Sika Davco Powder Mastic Advantages

• Commercial grade
• Dust Less Technology
• Non-vertical slump for easy wall tiling
• Use for thick or thin bed tiling
• Extended open time for tiling large areas
• White formulation ideal for light coloured tiles and stone

MIX PREPARATION
Mix Process

1. Measure the required amount of clean, potable water into a clean bucket, as per the following:
SITUATION / REQUIREMENT
MIX REQUIREMENTS PER 20KG
General applications
5L – 6L of clean, potable water

2. Slowly add the powder into the water while mixing with a mixing paddle attached to a drill. Always add the powder to the liquid. Do not mix by hand.

3. Continue to mix for several minutes until a creamy consistency is achieved, free of lumps of powder.

4. Allow mixture to stand for 5 minutes, remix then use the adhesive.