QUICK RENDER OFF WHITE
BASE COATS, CEMENT RENDERS, EXTERIOR
Rockcote Quick Render Off White is a pre-blended cement render, which meets Australian Standards in combustibility for building materials and is fully compliant with AS1530.1. It exhibits minimal drying shrinkage and creates a reliable surface for over-coating with Rockcote acrylic textures and paints. Rockcote Quick Render Off White dries harder, more quickly than Quick Render Grey.
Features
- Easy to use
- Excellent adhesion to properly prepared substrates
- Meets Australian Standards in combustibility for building materials and is fully compliant with AS1530.1
Benefits
- Tough
- Long term exterior protection
- Water repellent
- Can be painted after 48 hours (site mix sand and cement must be cured for 28 days prior to coating).
- Saves time and money
- Can reduce scaffold costs, when used instead of site mix sand and cement render.
Uses
- ROCKCOTE Quick Render Off-White is suitable for application over properly prepared substrates
such as brick, block, concrete, AAC blocks and panels, tilt up and off form concrete. - Can be used interior and exterior.
- ROCKCOTE Quick Render Off-White is ideal to use as a base coat for ROCKCOTE acrylic Coloured
- Renders, roll on textures and membrane paints and coatings.
- ROCKCOTE Quick Render Off-White should be overcoated within 28 days of application.
Coverage Rate: 2m2/20kg @ 4mm build
Application Method: Trowel or Spray
Dry Film Build: 4-10mm
Typical Data at 25°C and 50% Relative Humidity
Drying Time: 8 hours
Touch Dry Curing Time: 48 hours
- Dries in approximately 8 hours under normal drying conditions. (Dry times vary with
changes in temperature and humidity and residual moisture in the substrate). Once
initial dry set has occurred, rewet 2 to 3 times a day with clean water for 2 days.
This is especially important during hot and/or windy weather.
Usual No Coats: Suitable for 1 coat application depending on substrate and method of application.
Packaging Sizes: 20Kgs