Monoflex
A premium, water-resistant, flexible, rubber-based, fast-setting, cementitious adhesive for bonding ceramic and stone tiles to porous and non-porous surfaces subject to vibration and thermal movement.
Uses
A one-pack, thick or thin bed, internal and external floor and wall flexible adhesive for fixing over most substrates, e.g. concrete, heated concrete slabs, cement render, fibre cement sheets, plasterboard, existing properly prepared ceramic tiles, vinyl tiles and Construction Chemicals waterproof membranes. Not suitable for immersed or swimming pool application. Do not use directly over timber floors (Construction Chemicals provides other systems).
Features
- C2 high bond strength, exceeds 1MPa
- S2 exceptional flexibility deformation, exceeds 5mm
- E extended open time
- T non-slump
- A one-pack with two-pack performance, i.e. 1.9MPa adhesion > 5mm deflection
- Will withstand thermal and vibration movement and 1.0mm shrinkage cracks
- Exceeds the requirements of AS ISO 13007.1
- Ideal for fixing granite, porcelain & vitrified tiles
- For fixing tiles to fibre cement sheet over timber floors
- Suitable for shower alcoves
- Ideal for new concrete floors subject to shrinkage cracks
- Tiling over existing tiles
- Low VOC
Coverage (Approximate)
20kg will cover 10m2 using a 10mm notched trowel (floors).
Set Time
- Approximately 8-12 hours, depending on temperature, humidity and surface porosity.
- Allow longer for dense tiles and cooler conditions.
- When using externally or in shower alcoves protect the adhesive for 7 days (23°C @ 50% relative humidity) to allow the adhesive to fully cure before putting into use. Do not tile when rain is imminent.