Megapoxy PF
Megapoxy PF is a rapid set epoxy adhesive which sets in seven minutes and attains more than half its ultimate strength within 15 minutes of mixing.
Megapoxy PF “hardens-as-you-hold-it” for immediate on the spot emergency repairs to tanks, pipes, machinery, concrete structures etc.
ADVANTAGES
Smooth and easily workable
Simple 1:1 mix ratio
Creamy texture, blends easily
Non sag on vertical surfaces or overhead surface
Sets in 3 minutes at 25°C – 90% cure within 1 hour at 25°C
Very high strength permanent bonds
Tensile and Compressive Strengths superior to concrete
Excellent chemical resistance
Can be machined after 30 minutes cure at 25°C
Properly mixed Megapoxy PF will not stain or discolour white or light coloured marble and ceramics.
PROCESSING DATA
Mixing Ratio: 1 Part A to 1 Part B by volume
Mixing: Mix until uniform in colour
Working Life at 25°C: 3 minutes
Minimum Application Temperature: 10°C
Minimum Cure Time: 1 hour at 25°C
Full Cure Time: 2 hours at 25°C