Davco Sanitized Colorgrout
A cementitious grout designed for use with most types of ceramic tiles and natural stone applications.
- 1.5, 5 & 15 kg
- 19 Colors
- Mould and bacteria resistant
- Ideal for swimming pools and wet areas
- For joints 1-6mm wide
Davco Sanitized Colorgrout Usage
Tiles
Ideal for use with most types of ceramic tiles and natural stone applications.
Areas
Suitable for interior and exterior applications. Commercial and domestic walls and floors including swimming pools and wet areas. It is not suitable for use in harsh and demanding environments or where there are hygienic requirements i.e. commercial kitchens, public toilets, food processing plants etc. For these types of installations, use Davco Epoxy Grout.
Davco Sanitized Colorgrout Advantages
- Mould and bacteria resistant
- Ideal for swimming pools and wet areas
- For joints 1-6mm wide
SURFACE PREPARATION
- Before commencing grouting, ensure the tile adhesive has set firmly. This usually requires 24 hours with the majority of tile adhesives
- Remove any spacer lugs, rake-out any excess adhesive and any loose or foreign material from the grout joints
- In general, ensure the grout joints are clean and dry
MIX PREPARATION
- Measure the right amount of clean, potable water into a clean bucket.
- Slowly add the powder into the water while mixing with a mixing paddle attached to a drill. Do not mix by hand.
- Continue to mix for several minutes until a creamy consistency is achieved, free of lumps of powder.
- Allow mixture to stand for 5 minutes, remix then use the grout.