Davco K10 Plus
A FLEXIBLE, PREMIXED, WATER BASED POLYURETHANE CLASS III WATERPROOFING MEMBRANE
Davco K10 Plus is a premium performance, flexible, premixed, Class III, water based polyurethane waterproofing membrane designed for the use under tile, stone and other resilient finishes.
- Premixed, ready to use.
- Suitable as an anti fracture membrane
- Excellent cure time
Usage
Davco K10 Plus is suitable for interior and exterior applications. Commercial and domestic wall and floors including wet areas such as showers, bathrooms, terraces, balconies, roofs and walkways, prior to tiling, using a Sika branded polymer modified cement based tile adhesive. Davco K10 Plus is also suitable for confined areas as it is water based and solvent free.
Advantages
- Premixed, ready to use.
- Suitable as an anti fracture membrane
- Excellent cure time
- Water based polyurethane
- Class III, highly flexible >500%
- Non toxic
- Available in Green or Grey
Packaging
- Available in a 4L or 20L Pail (Green) and a 20L pail (Grey)
Colour
- Available in a 4L or 20L pail (green)
- and a 20L pail (grey)
Drying Time
- Allow the membrane to dry for approximately 1-2 hours prior to applying the second coat.
- Allow the membrane to dry for 6-8 hours prior to tiling or other finishes.
*Measurements are taken at 22°C and 50% relative humidity. Specifications vary according to site conditions and should be taken as a guide only.
Consumption
- The minimum dry film thickness required is 1.0mm.
- This should be achieved by applying 2 coats at a rate of 1.45L/m2.
- A 20L pail will cover approximately 13.8m2.