Davco 2 Part Rapid Adhesive

Davco 2 Part Rapid Part B Liquid 5L

WHERE TO USE

Surfaces Most common substrates; building boards including plasterboard, compressed and fibre cement sheet, rendered brickwork and blockwork, existing ceramic tiles, new concrete cured in 6 weeks and new screed cured in 24 hours, compatible waterproofing membranes, timber floors (a ceramic tile underlay is required in accordance with Australian Standard AS3958.1). Suitable for use over under-tile heating and over Davco acoustic underlay.

Sika Davco Two Part Rapid – Tiles

Ideal for ceramic, mosaic, terracotta, rectified, porcelain, slate, quarry, granite and moisture sensitive stone and marble. Specially formulated to adhere stones that are highly moisture sensitive including green marble.

Sika Davco Two Part Rapid – Areas

Suitable for interior and exterior applications. Commercial and domestic walls and floors, especially floors in high traffic areas such as supermarkets, factories, hospitals and airports. Suitable for use in submerged areas such as swimming pools and spas.

DIRECTIONS FOR USE

• Test the product in an inconspicuous area first

• It is essential to plan the area to be tiled, with inclusion of movement joints, in accordance with the Australian Standard AS3958.1 “Guide to the Installation of Ceramic Tiles.” Failure to do so may result in drummy or lifting tiles. Make sure normal building or surface movement is accommodated by installing movement joints as follows:

– Over movement joints in the substrate
– At a junction between different substrate materials
– At fixtures interrupting the tile surface e.g. columns
– At internal vertical corners
– Around the perimeter of the tiling system
– At a maximum of 4.5m centres, in a grid pattern
– Movement joints should be kept free from dirt and adhesive droppings
– All movement joints can be filled with Davco Elite Silicone or polyurethane type fillers