Davco Tile & Grout Cleaner

A specially formulated tile and grout cleaner used to remove tough dirt and stains from tiles and grout as well as mould and mildew from grout surfaces. Suitable for most common tiled surfaces.

Features & Benefits

Specially formulated ingredients

Effectively cleans tiles and grout

Removes minor efflorescence from grout

Packaging: 1L

Usage

Surfaces

Most common tiled surfaces. Can help remove minor efflorescence from grout surfaces. Removes tough dirt and stains from tiles and aged grout and helps remove mould and mildew from grout surfaces.

Tiles

Ideal for ceramic, mosaic, quarry and slate tiles.

DIRECTIONS FOR USE

• Test product in an inconspicuous area first
• Place 2-3 drops on the tile.
• Wait 15 minutes.
• Rinse well and examine when dry to determine if the product is suitable for use.

SURFACE PREPARATION

• Davco Tile & Grout Cleaner is an acid based product which can affect newly installed grout and may etch some specific types of tiles
• The grout must be fully cured before using the product
• Do not use on grout which has been installed for less than 28 days

MIX PREPARATION

Mix Process

Add Tile & Grout Cleaner to a clean plastic bucket and dilute with water at a ratio of 10 parts water to 1 part Tile & Grout Cleaner (5L of water to 500ml Tile & Grout Cleaner).

APPLICATION

Always use a saturated mop or sponge to wet down the surface with clean water before applying product

1. For normal cleaning, dampen a mop or sponge with the solution and wipe over the surface before rinsing immediately with clean warm water.
2. For heavily soiled areas apply a greater quantity of the solution. Allow the affected area to soak for up to 10 minutes and then scrub with a stiff nylon brush before rinsing well with clean warm water.

Clean-up & Return to Service

Use generous quantities of clean warm water