RLA Universal Primer

Universal Primer is a rapid drying solvent free low VOC water based acrylic primer. For use over porous and non porous substrates such as ceramic tiles, painted surfaces (waterbased only) and sealed or burnished concrete floors. For extremely non porous, hard and tight substrates it is recommended that a light grind or sand be conducted to enhance adhesion.

Universal primer is compatible with cement based ceramic tile adhesives and levelling compounds.

MIXING:

When diluting please ensure the primer and water are mixed thoroughly before use.

COVERAGE:

Approximately 5 to 10m per litre.

Spread rates may vary depending on substrate absorbency.

SETTING TIMES:

Allow primer to dry to a clear film approximately 30 minutes to 1 hour (@ 23°C) before the application of subsequent products.

Drying time may vary depending on substrate absorbency and climate conditions.

Once Universal Primer is a tack free dry film, only then can levelling compounds be applied over the primer.

CLEAN UP:

Clean tools immediately after use with water

SHELF LIFE / STORAGE:

12 -14 months when stored in original unopened packaging. To be stored in a dry area off the ground.

CONTAINER SIZES:

5 litre & 20 litre plastic containers