Laticrete Permacolor grout 10kg (20 colors)

Laticrete PERMACOLOR® Grout

Laticrete PERMACOLOR Grout is a high performance, fast setting grout that provides a grout joint that is dense and hard. Laticrete PERMACOLOR Grout is colour consistent and equipped with Anti-Microbial Protection. As a grout, mix with water only.

Features/Benefits

• Consistent colour
• Fast setting
• Mixes with water only
• Ideal for floors and walls (joint widths of 1.5 mm to 12 mm)
• Inhibits mould and mildew with anti-microbial protection
• Improved stain resistance for a cement based grout
• Interior and exterior applications
• Residential and commercial
• Certified Low VOC
• Can be mixed with 4237 Latex Additive and used as a coloured adhesive

Uses

• Ceramic tile, glass tile and stone
• Residential and commercial
• Interior and exterior
• Floors and walls
• Ideal for re-grouting applications
• Swimming pools, fountains and other wet area applications

Cautions

• Consult SDS for more safety information.
• During cold weather, protect finished work from traffic until fully cured.
• Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin.
  In case of contact, flush thoroughly with water.
• Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
• Ensure you have sufficient grout of the same batch for each area to be grouted. Where necessary to maintain colour consistency, mix batches of dry grout powder before adding water.
• Grout may scratch soft glazed or polished surfaces. Conduct a test area to verify results.
• In immersed applications or steam rooms allow PERMACOLOR Grout to cure for 14 days at 21°C before use of area.
  See TDS1006 for more information on these applications.
• Keep out of reach of children.